Motorola WS5100 Series Reference Manual page 111

4. Select the Dynamic Assignment
WLAN.
5. Select the Assign Multiple VLAN(s)
Multiple VLAN Mapping screen.
6. Configure the Multiple VLAN Mapping for WLAN
for the selected WLAN.
Multiple VLAN's per WLAN are mapped (by default) to a regular VLAN and are not supported on an
adaptive AP. Refer to Editing the WLAN Configuration on page 4-24
VLAN for adaptive AP support.
VLAN Displays the VLANs currently mapped to the WLAN. By default, VLAN 1 is
configured for any selected WLAN.
User Limit Displays the user limit configured for the mapped VLAN. The maximum allowed
user limit is 4096 per VLAN.
NOTE: The maximum number of secondary IPs that can be assigned to a VLAN is 32.
7. Select the Insert button to add the VLAN using the criteria described above.
8. Select a row from the Multiple VLAN Mapping table and click the
of a VLAN to a WLAN.
9. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
NOTE: In a cluster environment with multiple switches, please ensure that the VLAN list
is consistent across all switches.
checkbox for an user based VLAN assignment with Radius for this
button to map a WLAN to more than one VLAN. This displays the
table as required to add or remove multiple VLANS
Network Setup
to select and define an independent
Remove button to delete the mapping
4-29