Motorola WS5100 Series Reference Manual page 292

6-22 WS5100 Series Switch System Reference Guide
3. Click the Add
4. Select an ACL Type
• Standard IP List – Uses source IP addresses for matching operations.
• Extended IP List – Uses source and destination IP addresses and optional protocol information for
matching operations.
• MAC Extended List – Uses source and destination MAC addresses, VLAN ID and optional protocol
information.
5. Enter a numeric index name for the ACL in the
6. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
7. Click OK to use the changes to the running configuration and close the dialog.
8. Click Cancel
6.5.2.2 Adding a New ACL Rule
To add a new rule:
1. Select Security
2. Click the Configuration
button.
from the drop-down menu. The following options are available:
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
> ACLs from the main menu tree.
tab.
ACL ID field.