Motorola WS5100 Series Reference Manual page 384

7-18 WS5100 Series Switch System Reference Guide
2. Click the Add
3. Create a new (non DNS name) destination IP address for the new trap receiver to be used for receiving
the traps sent by the SNMP agent.
4. Define a Port Number
5. Use the Protocol Options
receiver.
6. Click OK to save and add the changes to the running configuration and close the dialog.
7. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
8. Click Cancel
button at the bottom of the screen.
for the trap receiver.
drop-down menu to specify the trap receiver as either a SNMP v2c or v3
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.