Motorola WS5100 Series Reference Manual page 378

7-12 WS5100 Series Switch System Reference Guide
DHCP
Radius
SNMP
Diagnostics
Wireless
5. Click the Expand All Items
display every trap that can be enabled.
Once expanded, traps can then be enabled by trap category or individually within each trap category.
6. Highlight a specific trap and click the
The items previously disabled (with an "X" to the left) now display with a check to the left of it.
7. Highlight a specific trap and click the
The items previously enabled (with a check to the left) now display with an "X" to the left of it.
8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the
button to enable the item as an active SNMP trap.
Those sub-items previously disabled (with an "X" to the left) now display with a check to the left of them.
Once the Apply
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the
to disable the item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of them.
10.Click Apply
11.Click Revert
Displays a list of sub-items (trap options) specific to the DHCP configuration option.
Select an individual trap within this subsection and click the
enable this specific trap or highlight the DHCP trap family parent item and click
Enable all sub-items
Displays a list of sub-items (trap options) specific to the Radius configuration
option. Select an individual trap within this subsection and click the
to enable this specific trap or highlight the Radius trap family parent item and click
Enable all sub-items
Displays a list of sub-items (trap options) specific to the SNMP configuration
option. Select an individual trap within this subsection and click the
to enable this specific trap or highlight the SNMP trap family parent item and click
Enable all sub-items
Displays a list of sub-items (trap options) specific to the Diagnostics configuration
option. Select an individual trap within this subsection and click the
to enable this specific trap or highlight the Diagnostics trap family parent item and
click Enable all
sub-items to enable all traps within the Diagnostics category.
Displays the list of sub-items (trap options) specific to Wireless configuration.
These include traps specific to wireless interoperability between the switch and its
associated devices. Select an individual trap and click the
a specific trap or highlight the Wireless trap family parent item and click
all sub-items to enable all traps within the Wireless category.
button to display the sub-items within each trap category. Use this item to
Enable
Disable
button is clicked, the selected items are now active SNMP traps on the system.
to save the trap configurations enabled using the Enable or Enable all sub-items options.
to discard any updates and revert back to its last saved configuration.
to enable all traps within the DHCP category.
to enable all traps within the Radius category.
to enable all traps within the SNMP category.
button to enable this specific trap as an active SNMP trap.
button to disable the item as an active SNMP trap.
Enable button to
Enable button
Enable button
Enable button
Enable button to enable
Enable
Enable all sub-items
Disable all sub-items button