Motorola WS5100 Series Reference Manual page 346

6-76 WS5100 Series Switch System Reference Guide
Modify the existing user's guest designation, password, expiry date and group assignments as required
to reflect the user's current local Radius authentication requirements.
5. If an existing user is no longer needed, select the user from those displayed and click the
to permanently remove the user.
6. To create a new user for use with the local Radius server, click the
information.
CAUTION: If password encryption is not enabled, Radius user passwords are stored in
the running configuration file in clear text. The user passwords are shown as encrypted if
the global password encryption is enabled. The maximum for the file is 5000 users, 100
groups, 25 clients, 5 realms and 2 LDAP servers.
User ID
Guest User
Password
Confirm Password
Current Switch Time
Start Date & Time
Expiry Date & Time
Available Groups
Configured Group
Define a unique user ID that differentiates this user from others with similar
attributes.
Select the Guest User checkbox to assign this particular user temporary access
to the local Radius server, thus restricting their authentication period to a user
defined interval.
Enter the password that adds the user to the list of approved users displayed
within the Users tab.
Re-enter (confirm) the password used to add the user to the list of approved users
displayed within the Users tab.
Displays the read only switch time. This is the time used for expiry data and
time.sers tab.
Defines the start date and time (in dd:MM:yyyy-hh:mm format) to login guest
users defined with temporary permissions.
Defines the date and time (in dd:MM:yyyy-hh:mm format) to timeout guest users
defined with temporary permissions.
Use the Available Groups Add ->
inclusion) for this specific user.
Displays existing groups available for the user.
Add button and provide the following
and Remove <- functions to map groups (for
Delete button