Viewing Sole Adapters - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
The
Enabled
column displays a green checkmark next to the SOLE adapter once enabled. A Red X
defines the adapter as disabled.
NOTE In order to set the listening MAC in each radio you must use the radio command in
the switch's Command Line Interface (CLI). An example of the command syntax is:.
#radio <1-n> tag-type aeroscout listen-addr 01-0c-cc-00-00-00
3. Click the
Disable
to the SOLE adapter once disabled.
5.8.2 Viewing SOLE Adapters
Periodically review the SOLE Adapters tab to assess the adapters available to the switch. To review available
SOLE adapters:
1. Select
Services
2. Select the
SOLE Adapters
3. Review the following to ascertain the SOLE adapters seen by the switch:
Type
Version
Build Date
button to disable a selected SOLE adapter. The Enable column displays a red X next
>
SOLE
from the main menu tree.
tab.
Displays the configuration type for each SOLE adapter. Currently,
the only supported type is Aeroscout.
Displays the version number of the SOLE adapter.
Displays the SOLE adapter build date and time.
5-63
Switch Services
Advertisement
Table of Contents
