Clutch Pedal Height; Clutch Pedal Free Play; Exploded View Of Clutch Slave Cylinder - Mazda 1983 RX7 Service Manual

Fig. 4:

Exploded View of Clutch Slave Cylinder

Inspect clutch hydraulic components for leakage and repair or replace
as necessary.
Reassembly
1) Wash parts in clean brake fluid or denatured alcohol. Blow
dry with compressed air. Check all parts for wear or damage. Standard
piston-to-slave cylinder bore is .0016-.0049" (.040-.125 mm). If
cylinder bore-to-piston clearance exceeds .006" (.15 mm), replace
piston and/or cylinder.
2) Before assembly, coat pistons and cups with clean
hydraulic fluid. To complete reassembly, reverse disassembly
procedure.
ADJUSTMENTS

CLUTCH PEDAL HEIGHT

1) On RX7 and Pickup, measure distance from center of upper
surface of pedal pad-to-dash insulator. To adjust height, loosen lock
nut. Turn stopper bolt. Tighten lock nut after adjustment is made. See
Fig. 5.
2) On GLC Wagon, loosen clutch switch lock nut. Rotate switch
until correct height is obtained. Tighten lock nut. Standard pedal
height is 7.48-7.68" (190-195 mm).

CLUTCH PEDAL FREE PLAY

1) On RX7 and Pickups, adjust clutch pedal free play,
measured at pedal pad, to .02-.12" (0.6-3.0 mm). Loosen lock nut and
turn pedal stopper bolt to specification. Tighten lock nut. See
Fig. 5.
CLUTCH
Article Text (p. 6)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Sunday, August 26, 2001 06:33PM