REP 10.14 Fuser Gear
Parts List on
PL 10.11 Item 14
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Do not touch the Fuser while it is hot.
Fuser plastic is easily over stressed or broken. Use care when releasing hooks that secure
Fuser covers and guides.
1.
Remove the Rear Door,
REP
28.6.
2.
Remove the Fuser,
REP
10.10.
3.
Remove 3 screws (2 metal) and (1 plastic) that secure the Fuser top cover,
Figure 1 Remove the Fuser top cover
4.
Remove 3 screws (Black, plastic) that secure the duplex cover to the Fuser,
4 Repairs and Adjustments
REP 10.14
WARNING
WARNING
CAUTION
Figure
1.
5.
Open the lower exit guide,
Figure
2.
04/2016
4-104
Figure 2 Remove the duplex cover
Figure
3.
Phaser 4600/4620/4622 Printer Service Manual
Revised