Mid-Mounting A Switch In A Two-Post Rack - Extreme Networks Summit X150 Series Hardware Installation Manual

#14 AWG copper cable for grounding the switch
●
The recommended insulation color is green or green with yellow stripe
Stripping tool
●
Crimping tool for attaching the ring terminal to the ground wire
●
ESD-preventive wrist strap for installing optional ports at the back of the switch
●

Mid-Mounting a Switch in a Two-Post Rack

To mid-mount a Summit X670 series switch in a two-post rack:
1 On one side of the switch, set a mounting bracket against the switch housing, with the flange toward
the back of the switch (see
2 Use six of the provided screws to secure the bracket to the switch housing.
3 Repeat these steps to attach the other bracket to the other side of the switch.
Figure 190: Attaching a Rack-mounting Bracket
Summit Family Switches Hardware Installation Guide
Figure 190).
SH_255
Installing a Summit X670 Series Switch
235