Removing A Summit X460 Series Switch; Removing A Summit X460 Ac Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

Removing a Summit X460 Series Switch

Before you remove a Summit X460 series switch from an equipment rack, remove all installed power
supplies as described in one of the following sections:
"Removing a Summit X460 AC Power Supply" on page 313
●
"Removing a Summit X460 DC Power Supply" on page 314
●

Removing a Summit X460 AC Power Supply

CAUTION
The power supply may be hot to the touch; wear thermal protective gloves when handling the power
supply during removal.
To remove a Summit X460 AC power supply:
1 Disconnect the AC power cord from the wall outlet and from the power supply.
2 Push the latching tab toward the power supply handle and pull outward on the handle to disengage
the power supply internal connectors (see
Figure 260: Removing a Summit X460 AC Power Supply
300 W AC Power Supply
3 Carefully slide the power supply the rest of the way out of the switch.
Summit Family Switches Hardware Installation Guide
Removing a Summit X460 Series Switch
Figure 260).
SH_203
750 W AC Power Supply
SH_206
313