Connecting The Ground Wire - Extreme Networks Summit X150 Series Hardware Installation Manual

Replacing DC Power Supplies in Summit Family Switches

Connecting the Ground Wire

WARNING!
Be sure to connect the chassis ground wire before you connect any power cables.
To connect the ground wire to the Summit 450 W DC power supply:
1 Verify that the DC circuit is de-energized.
2 Pull the cover off the terminal block
3 Identify the grounding point at the left of the terminal block
Figure 242: Connecting the Ground Wire
292
(Figure 248).
SH_159
Summit Family Switches Hardware Installation Guide
(Figure 248).