Extreme Networks Summit X150 Series Hardware Installation Manual page 206

Installing Summit Family Switches
5 At the front of the switch, place a front mounting bracket against each side of the switch, in front of
the ventilation openings in the side of the switch
Figure 156: Positioning the Front Mounting Brackets
6 Using the provided screws, attach each front bracket to the switch
7 Slide the switch back in the rack until the front mounting brackets are against the front of the rack
post (Figure 157).
Figure 157: Securing the Front Mounting Brackets to the Rack
8 Using mounting screws suitable for your equipment rack, secure the mounting brackets to the front
of the rack post.
After the switch is secured to the rack, install and connect power supplies as described on
AC power supplies or on
NOTE
If you are installing a VIM2 module, install it in the switch before you connect the switch to power
(see page 269).
206
SH_129
SH_130
page 212 for DC power supplies.
(Figure 156)
(Figure
Summit Family Switches Hardware Installation Guide
156).
page 210 for