Removing A Summit X670 Series Switch; Removing The Switch From The Rack - Extreme Networks Summit X150 Series Hardware Installation Manual

Removing a Summit X670 Series Switch

Before you remove a Summit X670 series switch from a rack, remove all installed power supplies as
described in the following sections:
"Removing a Summit 450 W AC Power Supply" on page 315
●
"Removing a Summit 450 W DC Power Supply" on page 316
●

Removing the Switch from the Rack

To remove a Summit X670 series switch from an equipment rack:
1 Verify that the power supplies have been removed from the switch.
2 Support the switch as you remove the screws that hold the switch to the rack.
3 Slide the switch out of the rack.
Summit Family Switches Hardware Installation Guide
Removing a Summit X670 Series Switch
325