Connecting Power To The 300 W Ac Power Supply; Connecting Power To The 750 W Ac Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

Replacing AC Power Supplies in Summit Family Switches

Connecting Power to the 300 W AC Power Supply

To connect power to the 300 W AC power supply:
1 Connect the AC power cord to the input connector on the power supply
2 Rotate the wire clip into place over the power cord connector.
3 Connect the other end of the power cord to an AC power outlet.

Connecting Power to the 750 W AC Power Supply

To connect power to the 750 W AC power supply:
1 If necessary, slide the plastic cord retainer farther away from the back of the switch (Figure 228).
Figure 228: Moving the Power Cord Retainer
SH_227
2 Connect the AC power cord to the input connector (Figure 229).
Figure 229: Connecting the Power Cord
SH_228
Summit Family Switches Hardware Installation Guide
278