Summit X450e Series Switches
The Summit X450e series switches provide 24 or 48 fixed 10/100/1000BASE-T Ethernet ports using
RJ-45 connectors. Models are available with PoE and without PoE. These switches are available only in
AC-powered models.
The Summit X450e series of switches consists of the following switches:
Summit X450e-24t switch
●
Summit X450e-24t-TAA switch
●
Summit X450e-48t switch
●
Summit X450e-48t-TAA switch
●
Summit X450e-24p switch
●
Summit X450e-24p-TAA switch
●
Summit X450e-48p switch
●
Summit X450e-48p-TAA switch
●
NOTE
In the descriptions that follow, references to a Summit X450e series model number also apply to the
equivalent TAA-compliant switch version
Summit X450e-24t Switch
The front panel of the Summit X450e-24t switch
Twenty fixed autosensing 10/100/1000BASE-T ports (ports 1–20) that provide 20 Gbps of
●
high-density copper connectivity
Four combination ports (ports 21–24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
Serial console port used to connect a terminal and perform local management
●
Figure 43: Summit X450e-24t Switch Front Panel
Stack number
indicator
Summit Family Switches Hardware Installation Guide
(page
67)
(page
69)
(page
71)
(page
73)
.
(Figure
10/100/1000 Mbps ports
Summit X450, X450a, and X450e Series Switches
43) includes:
"Combination Ports and Failover" on page
Table 24 on page
76.
Console
port
Combination ports
SH_179
21.
67