Extreme Networks Summit X150 Series Hardware Installation Manual page 209

5 From the front of the rack, slide the switch onto the rear mounting brackets
Figure 162: Installing the Switch—Four-Post Installation
6 Slide the switch all the way into the rack and secure the mounting brackets to the front posts using
suitable screws (Figure
Figure 163: Securing the Switch to the Front Rack Posts—Four-Post Installation
After the switch is secured to the rack, install and connect power supplies as described on
AC power supplies or on
NOTE
If you are installing a VIM2 module, install it in the switch before you connect the switch to power.
Summit Family Switches Hardware Installation Guide
163).
page 212 for DC power supplies.
Installing a Summit X480 Series Switch
(Figure
SH_146
SH_147
162).
page 210 for
209