Chapter 11: Replacing Fan Modules In Summit Family Switches; Pre-Installation Requirements - Extreme Networks Summit X150 Series Hardware Installation Manual

11
C H A P T E R
This chapter describes how to replace fan modules in a Summit X460, X480, X650, or X670 series switch.
The procedure for replacing a fan module is the same for all switch series. Illustrations in this chapter
show the Summit X460 and X650 series switches.
This chapter includes the following sections:
Pre-Installation Requirements on page 303
●
Replacing a Summit Fan Module on page 304
●
NOTE
Read the information in this chapter thoroughly before attempting to replace a fan module.

Pre-Installation Requirements

You need a 1/2-inch flat-blade screwdriver to replace a fan module in a Summit family switch.
CAUTION
Be sure to finish the replacement procedure promptly. The switch may overheat if it is left without cooling
for an extended period.
Summit Family Switches Hardware Installation Guide
Replacing Fan Modules in
Summit Family Switches
303