Two-Post Rack Mount - Extreme Networks 8520 Series Hardware Installation Manual

Two-Post Rack Mount

Figure 14: Pushing the Mounting Brackets into the Rail Assemblies
9. Screw the mounting ear thumbscrews into the rack rails to hand tightness.
Figure 15: Completed Installation: Switch in 4-Post Rack
Two-Post Rack Mount
You can attach the switch to a two-post rack in either of two configurations:
•
Front mount
•
Mid-mount
The side of the switch has different sets of holes for attaching mounting brackets in either configuration.
Brackets for a two-post mount are not included in the box with the switch. However, they can be
ordered separately using part number XN-2P-RKMT299.
36 Extreme 8520 Series Hardware Installation Guide
Install the Switch