Vim4-40G4X Versatile Interface Module For The Summit X670V-48X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 93: Summit X460 Series Stacking Modules
LED
Stacking ports
SummitStack Module
VIM4-40G4X Versatile Interface Module for the
Summit X670V-48x Switch
The rear panel of the Summit X670V-48x switch provides a slot for an optional VIM4-40G4X versatile
interface module. The VIM4-40G4X module
optical modules or QSFP+ compatible active or passive cables.
Each physical port can be configured to operate as a single 40-Gbps port or as four 10-Gbps ports.
When the port operates in 40-Gbps mode, you can connect the port using either a QSFP+ direct-attach
cable or an installed QSFP+ module and compatible fiber optic cable. When the port is configured to
operate in 10-Gbps mode, you must connect it using a special 1-to-4 breakout fiber optic cable.
The VIM4-40G4X module requires ExtremeXOS 12.6.1 software (or later) installed on the
Summit X670V-48x switch.
Figure 94: VIM4-40G4X Versatile Interface Module
1
2
1 = QSFP+ port
2 = Port LEDs
Summit Family Switches Hardware Installation Guide

VIM4-40G4X Versatile Interface Module for the Summit X670V-48x Switch

LED
SH_191
(Figure 94) provides four unpopulated cages for QSFP+
SH_252
LED
Stacking ports
SummitStack-V80 Module
LED
SH_192
129