Extreme Networks Summit X150 Series Hardware Installation Manual page 247

Figure 198: Redundant Power Connections
redundant power cable
3 Connect an appropriate AC power cord to the AC connector on each unit.
NOTE
An AC power cord is not provided with the EPS-160 unit. See
page 333 for information about selecting a power cord.
The Power LED on the front of the EPS-160 should light solid green to indicate that it is ready.
Summit Family Switches Hardware Installation Guide
Slot for plug
Keyed end of
Installing an EPS-160 External Power Module (with EPS-T)
To AC
Redundant
power cable
S450_008
"Selecting Power Supply Cords" on
247