Extreme Networks Summit X150 Series Hardware Installation Manual page 195

Figure 143: Installing a 750 W AC Power Supply
NOTE
If power supplies are not installed in both power supply bays, be sure to install a cover over the
unoccupied bay. Unoccupied bays must always be covered to maintain proper system ventilation and EMI levels.
4 Connect the AC power cord as follows:
a If necessary, slide the plastic cord retainer farther away from the back of the switch
Figure 144: Moving the Power Cord Retainer
b Connect the AC power cord to the input connector
Summit Family Switches Hardware Installation Guide
Installing Summit X460 AC Power Supplies
SH_205
SH_227
(Figure 145).
(Figure 144).
195