Summit X460-48T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Family Switches

Summit X460-48t Switch

The front panel of the Summit X460-48t switch
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
●
high-density copper connectivity
Four unpopulated SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 86.
Stack number indicator
●
Figure 53: Summit X460-48t Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X460-48t switch
Slot for an XGM3-2sf port option card (see
●
Slot for a SummitStack or SummitStack-V80 stacking module (see
●
Replaceable fan tray
●
Two power supply bays for either AC or DC power supplies (see
●
page 112)
Figure 54: Summit X460-48t Switch Rear Panel
Module slot A Module slot B
Filler panel Filler panel
80
(Figure 53) includes:
10/100/1000 Mbps ports
(Figure 54) includes:
page 128)
Two power supply
Fan tray
Filler panel
"Summit X460 Series Switch LEDs" on
SFP ports
page 128)
"Summit X460 Power Supplies" on
(PSU) slots
SH_188
Summit Family Switches Hardware Installation Guide
Console
port
SH_185