Summit X460-48P Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X460-48p Switch

The front panel of the Summit X460-48p switch
Forty-eight autosensing 10/100/1000BASE-T ports (ports 1–48). In addition to 48 Gbps of
●
high-density copper connectivity, these ports provide up to 30 Watts of PoE per port.
Four unpopulated SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 86.
Stack number indicator
●
Figure 61: Summit X460-48p Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X460-48p switch
Slot for an XGM3-2sf port option card (see
●
Slot for a SummitStack or SummitStack-V80 stacking module (see
●
Replaceable fan tray
●
Two power supply bays for the Summit X460 750 W AC power supply (see
●
Supplies" on page 112)
NOTE
Only the Summit X460 750 W AC power supply is compatible with the Summit X460-24p switch. Other
Summit X460 series power supplies do not support PoE operation.
Figure 62: Summit X460-48p Switch Rear Panel
Module slot A Module slot B
Filler panel Filler panel
Summit Family Switches Hardware Installation Guide
(Figure
10/100/1000 Mbps ports
(Figure 62) includes:
page 128)
Two power supply
Fan tray
Filler panel
Summit X460 Series Switches
61) includes:
"Summit X460 Series Switch LEDs" on
SFP ports
page 128)
"Summit X460 Power
(PSU) slots
Console
port
SH_186
85