Summit X480-48T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Family Switches

Summit X480-48t Switch

The front panel of the Summit X480-48t switch
Forty-four fixed 10/100/1000BASE-T autosensing ports (ports 1–44) that provide 44 Gbps of
●
high-density copper connectivity
Four combination ports (ports 45–48) using RJ-45 connectors or SFPs to provide 4 Gbps of copper or
●
fiber connectivity. The SFP ports support both 100BASE-X and 1000BASE-X optical modules.
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 91.
Stack number indicator
●
Figure 67: Summit X480-48t Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X480-48t switch
Slot for a VIM2 virtual interface module (see
●
Replaceable fan tray
●
Two power supply bays for either AC or DC power supplies (See
●
and X670 Series Switches" on page
Figure 68: Summit X480-48t Rear Panel
Slot for VIM2
versatile interface module
90
(Figure
10/100/1000 Mbps ports
(Figure 68) includes:
page 126
115.)
Fan tray
67) includes:
"Combination Ports and Failover" on page
"Summit X480 Series Switch LEDs" on
Console
port
Combination ports
"Power Supplies for Summit X480
Two power supply
(PSU) slots
SH_154
Summit Family Switches Hardware Installation Guide
21.
SH_119