Extreme Networks Summit X150 Series Hardware Installation Manual page 270

Installing Optional Ports
5 Install the VIM in the switch
a Make sure the inserter/ejector levers are rotated down.
b Carefully slide the module into the switch until the inserter/ejector levers begin to rotate upward.
c Simultaneously rotate both levers upward to seat the module internal connectors.
d Insert and tighten the retaining screws you removed earlier.
Figure 221: Installing a Versatile Interface Module
VIM2-SummitStack module
270
(Figure 221):
SH_132
VIM4-40G4X module
Summit Family Switches Hardware Installation Guide
SH_260