Summit X650 Power Supplies - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Power Supplies

Summit X650 Power Supplies

The Summit X650 series switches can be powered by either of the following power supplies:
Summit X650 AC power supply (Model 10914)
●
Summit X650 DC power supply (Model 10915)
●
Either power supply provides 850 W of power to the switch.
The Summit X650 series switches accommodate one or two Summit X650 power supplies. In a
redundant power configuration, both power supplies are fully fault-tolerant and load-sharing. You can
remove one power supply without interrupting switch operation.
An AC power input cord is not provided with the Summit X650 AC power supply. You can order an
appropriate cord from Extreme Networks or from your local supplier. The power cord must meet the
requirements listed in "Selecting Power Supply Cords" on page
NOTE
Extreme Networks does not recommended using the Summit X650 DC power supply in combination with a
Summit X650 AC power supply in the same Summit X650 series switch.
The Summit X650 power supplies have the status LED described in
Table 41: Summit X650 Power Supply LED
Color and State
Blinking green
Steady green
Blinking red
Steady red
116
Meaning
AC in; no output
Normal operation
Output error
Critical error
333.
Table 41.
Summit Family Switches Hardware Installation Guide