Summit X150-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X150-24t Switch

The front panel of the Summit X150-24t switch
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
●
high-density copper connectivity
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 26.
Serial console port used to connect a terminal and perform local management
●
Figure 1: Summit X150-24t Switch Front Panel
Stack
1
2
The rear panel of the Summit X150-24t switch
Ethernet management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-160 External Power Module
●
See "EPS-160 External Power Module (with EPS-T)" on page 104
connecting redundant power supply cable is shipped with the EPS-160 unit.
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 2: Summit X150-24t Switch Rear Panel
Management port
Summit Family Switches Hardware Installation Guide
(Figure
10/100 Mbps ports
(Figure
External power
supply connection
Power socket
Summit X150 Series Switches
1) includes:
"Combination Ports and Failover" on page
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_050B
2) includes:
for more information. The
21.
SH_051
23