Summit X460 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Family Switches

Summit X460 Series Switches

The Summit X460 series switches are 24-port or 48-port switches that provide Ethernet connectivity
using fixed 10/100/1000BASE-T RJ-45 ports or installable SFP or SFP+ optical modules. Two
Summit X460 models support the PoE+ IEEE 802.3at standard and provide up to 30 Watts of power per
port. These models provide a total switch PoE power budget of 380 Watts with a single installed power
supply and 760 Watts with two installed power supplies.
Four of the Summit X460 models include ports that support Synchronous Ethernet. Five models have
four combination ports that provide 10/100/1000 BASE-T or SFP connectivity for 4 Gbps of copper or
fiber connectivity.
A serial console port on the front panel allows you to connect a terminal and perform local
management. An Ethernet management port can be used to connect the system to a parallel
management network for administration. Alternatively, you can use an Ethernet cable to connect this
port directly to a laptop to view and locally manage the switch configurations. The Ethernet
management port supports 10/100/1000 Mbps speeds.
The rear panel of the switch provides slots for installing two types of optional ports:
10-gigabit Ethernet ports on the XGM3-2sf option card
●
Dedicated stacking ports on the SummitStack or SummitStack-V80 stacking module
●
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either an AC
or DC power supply. The PoE-capable models require a specific AC power supply. For more
information about the power supplies used in the Summit X460 switches, see
The Summit X460 series switches include the following base models:
Summit X460-24t switch
●
Summit X460-48t switch
●
Summit X460-24x switch
●
Summit X460-48x switch
●
Summit X460-24p switch
●
Summit X460-48p switch
●
78
(page 79)
(page 80)
(page 81)
(page 82)
(page 83)
(page 85)
Summit Family Switches Hardware Installation Guide