Figure 139: Installing the Summit X460 Series Switch
4 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
The Summit X460 series switch is shipped with a single power supply unit. You can install two power
supplies for a redundant power configuration. After the switch is secured to the rack, install the
necessary power supplies for your configuration. For instructions, see the following pages:
300 W AC power
supply—page 194
●
750 W AC power
supply—page 194
●
300 W DC power
supply—page 197
●
To install an XGM3-2sf port option card, see
To install a stacking module, see
Installing Summit X460 AC Power Supplies
Two AC power supplies are available for the Summit X460 series switches:
Summit X460 300W AC power supply (Model 10930)
●
This power supply is compatible with the Summit X460-24t, Summit X460-48t, Summit X460-24x,
and Summit X460-48x switch.
Summit X460 750W AC power supply (Model 10931) for PoE models
●
This power supply is compatible with the Summit X460-24p and Summit X460-48p switch.
AC Power Supply Cords
An AC power cord is not included with a Summit X460 AC power supply. AC power cords for use in
the US and Canada from Extreme Networks or from your local supplier. The cord must meet the
requirements listed under
Summit Family Switches Hardware Installation Guide
page
page
271.
"Selecting Power Supply Cords" on page
Installing Summit X460 AC Power Supplies
SH_200
267.
333.
191