Installing Ac Power Supplies In Summit X460 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

4 Slide the switch into the equipment rack
on page 229).
Figure 200: Installing the Summit X430-8p Series Switch
5 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)

Installing AC Power Supplies in Summit X460 Series Switches

Two AC power supplies are available for the Summit X460 series switches:
•
Summit 300 W AC power supply (Model 10930)
This power supply is compatible with the Summit X460-24t, Summit X460-48t, Summit X460-24x,
and Summit X460-48x switch.
•
Summit 750 W AC power supply (Model 10931) for PoE models
This power supply is compatible with the Summit X460-24p and Summit X460-48p switch.
AC Power Supply Cords
An AC power cord is not included with a Summit AC power supply.
You can purchase AC power cords for use in the US and Canada from Extreme Networks or from your
local supplier. The cord must meet the requirements listed under
Powered Switches and AC Power
Installing a 300 W AC Power Supply in a Summit X460 Series Switch
Warning
To prevent an electrical hazard, make sure that the AC power cord is not connected to the
power supply before you install the power supply in the power supply bay.
Caution
Make sure that the AC power supply circuit is not overloaded. Use proper over-current
protection, such as a circuit-breaker, to prevent over-current conditions.
To install a 300 W AC power supply in a Summit X460 series switch:
Summit Family Hardware Installation Guide
(Figure 200: Installing the Summit X430-8p Series Switch
Supplies.
Installing Summit Family Switches
Power Cord Requirements for AC-
229