Installing Ac Power Supplies In Summit X460 Series Switches; Ac Power Supply Cords - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 6: Installing Summit Family Switches
Figure 183: Installing the Summit X460 Series Switch
4 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
The Summit X460 series switch is shipped with a single power supply unit. You can install two power
supplies for a redundant power configuration. After the switch is secured to the rack, install the
necessary power supplies for your configuration. For instructions, see the following pages:
300 W AC power supply—page 247
●
750 W AC power supply—page 247
●
300 W DC power supply—page 250
●
To install an XGM3-2sf port option card, see
To install a stacking module, see
Installing AC Power Supplies in Summit X460 Series
Switches
Two AC power supplies are available for the Summit X460 series switches:
Summit 300 W AC power supply (Model 10930)
●
This power supply is compatible with the Summit X460-24t, Summit X460-48t, Summit X460-24x,
and Summit X460-48x switch.
Summit 750 W AC power supply (Model 10931) for PoE models
●
This power supply is compatible with the Summit X460-24p and Summit X460-48p switch.

AC Power Supply Cords

An AC power cord is not included with a Summit AC power supply. You can purchase AC power cords
for use in the US and Canada from Extreme Networks or from your local supplier. The cord must meet
244
SH_200
page 333.
page 335.
Summit Family Switches Hardware Installation Guide