®
4
Invacare
- STORM
4.2
Electronics modules
A variety of electronics modules can be fitted to the mobility aid.
Before you connect mobility aid components such as adjusting motors/actuators or motors, please
begin by ascertaining which module is installed. Please refer to the following table for an overview.
Electronic module
MAX
Designation
Power module
ACS 2 PMA90L
Actuator module
ACT 2 / ACT 4
Lighting PCB
G-Trac sensor
Notes
The following remotes can be connected:
- REM 24 SD
- REM A
- REM B
- REM 550
The actuator module is optional.
The lighting PCB is optional.
The G-Trac sensor is optional
SERVICE MANUAL
17