Sub-Network Health and Status Branch
The Sub-Network Health and Status (SubHS) function is not available on multipoint
tributary modems or with certain modulations (V.29, V.33, V.22bis, and V.27bis).
The SubHS branch of the Top-Level menu allows you to display alarm conditions in downstream
modems.
Status
Configure
To access the SubHS branch from the Top-Level menu, make the following selections:
Press the
3920-A2-GN31-10
"Status"
Plist
Control
Test
SubHS
Leased:28.8
Test
SubHS
F1
F2
key until SubHS appears. Select SubHS.
If there are no modems in the poll list, the message Poll List
Empty! appears on the second line of the LCD.
Sub-network HS
Nxt
xxx
yyyyyy
F1
F2
April 1995
Call_Setup
Tlk/Data
F3
NOTE
F3
DCP Operation
(Mux Disabled
only)
Security
Remote
3-63