Configuration Tables; Mux Enabled - Paradyne Comsphere 3920Plus Installation And Operation Manual

COMSPHERE 392xPlus Modems

Configuration Tables

The modem's configuration options are arranged into six groups if the multiplexer (mux) is
enabled, or nine groups if the mux is disabled. When using configuration option tables, be sure
you are using the correct group (mux enabled or mux disabled). Failure to do this may lead
to erroneous assumptions about the functionality of certain configuration options.
l
A
Throughout these tables, two selections frequently appear on the LCD: Enable and Disable. Unless
otherwise stated, Enable selects a configuration option and makes it available for use; Disable
makes a configuration option unavailable for use.
The remainder of this chapter discusses each Mux Enabled and Mux Disabled configuration option
group in detail.
l

Mux Enabled

With the mux enabled, the modem's configuration options are arranged by functionality into the
following:
The following graphic represents the structure of the configuration options with the mux enabled.
4-8
The star symbol indicates configuration option groups which are valid when the mux is
enabled.
The solid arrow indicates configuration option groups which are valid when the mux is
disabled.
In some countries, the range of allowable values of some
configuration options is restricted. The modem will accept any
selection, but it will set the configuration option to the closest legal
value. The actual value that is accepted by the modem is displayed
when the F2 key is pressed to enter a selection.
DTE Interface — Mux Enabled (Table 4-1)
Line Dialer — Mux Enabled (Table 4-2)
Dial Line — Mux Enabled (Table 4-3)
Leased Line — Mux Enabled (Table 4-4)
Test — Mux Enabled (Table 4-5)
Misc — Mux Enabled (Table 4-6)
The DTE Dialer, V.42/MNP/Buffer, and Security branches are not
available when the Mux is enabled.
April 1995
NOTE
NOTE
3920-A2-GN31-10