To access the Call Setup branch from the Top-Level menu, make the following selections:
Press the
Dial
For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to Change Directory for information on storing telephone numbers in directory
locations.
For leased backup applications, Dial allows you to switch to the backup leased line. Any valid
non-empty directory location may be used. The remote modem cannot automatically answer the
simulated call. Use the Answer function of the remote modem in conjunction with the Dial
function to manually switch to the backup leased line.
To access Dial from the Call Setup branch, make the following selection:
Select Dial to display the first directory telephone number.
To view other directory locations, select Nxt.
Once the directory location you want appears on the LCD, press the F2 or F3 key to dial the
number.
3920-A2-GN31-10
Leased:28.8
Call_Setup
F3
F1
F2
key until Call_Setup appears. Select Call Setup.
Call Setup:
>
Dial
Disconnect
F1
F2
F3
DialDirectory:
Nxt
01:5551234
F3
F1
F2
DialDirectory:
Nxt
02:3219876
F1
F2
F3
April 1995
DCP Operation
3-65