COMSPHERE 392xPlus Modems
After selecting the desired interface, the message Command Complete appears on the bottom line
of the LCD and the selected interface appears in the xxxxx field.
To exit this function and remain in the Control branch, press the
Top-Level menu, press the
Make Busy/Remove Make Busy
The Make Busy function forces the modem off-hook so it cannot answer a call. This is often used
with PBX systems to permit the busy out of a PBX port for rotary or hunt groups.
To access Make Busy from the Control branch, make the following selections:
Press the
The modem is now in a forced busy condition. Command Complete appears on the LCD.
To remove the modem from Make Busy mode, press the
RemoveMakeBusy appears.
Press any function key to select RemoveMakeBusy. The message Command Complete appears
on the LCD.
3-40
key.
To prevent violations of FCC and DOC regulations, this
function must only be used behind a user's PBX.
Control:
Make_Busy
F3
F1
F2
key until Make Busy appears. Select Make Busy.
Make Busy
Command Complete
F1
F2
F3
Control:
RemoveMakeBusy
F1
F2
F3
April 1995
key. To exit and return to the
WARNING
key once and the
key until
3920-A2-GN31-10