Paradyne Comsphere 3920Plus Installation And Operation Manual page 111

For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function. The following display does
not appear in point-to-point modems.
The password field (yyyyyyyy) displays the remote access password of the modem to be accessed
by the Remote function.
To increment digits within the password field (yyyyyyyy), use the
cursor ( _ ) under the digit to be incremented. Press the F2 (
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
or
If operation over the secondary channel is desired, press any function key to select the secondary
channel. Secondary channel only appears if using V.34, V.32 terbo, V.32bis, V.32 or TMp
modulation. If operation over the primary channel is desired, press the
displays and press any function key. Primary channel operation is not available when initiating
a Remote function from a TMp tributary modem.
3920-A2-GN31-10
Choose Password:
"
Ent yyyyyyyy
F1 F2 F3
Select Channel >
Secondary
F1 F2 F3
Select Channel <
Prim (data blckd)
F1 F2 F3
April 1995
DCP Operation
and keys to position the
"
) key to increment the digit.
key until primary
3-77