Editing And Saving A Configuration Option - Paradyne Comsphere 3920Plus Installation And Operation Manual

COMSPHERE 392xPlus Modems
The Configure branch consists of the following three levels:

Editing and Saving a Configuration Option

The following example shows how to change the Remote Access Password using the DCP. (If you
intend to access another 392xPlus modem via the Remote branch of the Top-Level menu, the
Remote Access Password must be the same for both modems.) By following these procedures you
learn how to load a factory preset configuration area (in this case, Sync Leased), how to edit a
configuration option (Remote Access Password), and how to save changes to a configuration area
(Active (Saved)). The shaded key indicates what key to press.
Select Configure from the Top-Level menu.
Scroll across the LCD and select the Factory configuration area.
4-4
Ld EditArea frm. Allows the selection of the Active (Operating), Active (Saved),
Customer 1, Customer 2, and Factory configuration areas.
Choose Function. Allows you to make changes (Edit) to existing configuration options or
write (Save) these changes to either the Active (Saved), Customer 1, or Customer 2.
Edit Strap Group. Contains the eight software configuration option groups that determine
how the modem operates, plus the Security group, which can be viewed but not changed
using this branch.
Leased:28.8
Status Configure
F1 F2
LdEditAreafrm
Activ(Operating)
F1 F2
LdEditAreafrm
Factory
F1 F2
April 1995
F3
>
F3
<
F3
3920-A2-GN31-10