Setting Up Network Health For Framesaver Devices; Installation And Setup Of Network Health - Paradyne FrameSaver FLEX 9123 User Manual

9. Setting Up Network Health for FrameSaver Devices

Installation and Setup of Network Health

Refer to the Network Health Installation Guide for installation instructions, and
follow the instructions applicable to your network platform. Once Network Health is
installed, you need to set up the application so it will support FrameSaver units.
Each Network Health application provides a different set of functions, called a
module. Each module used requires a separate license to gain access to those
features and functions. Make sure you license the Poller application so you can
poll FLEX units and collect data.
To use this application:
Setup and operation information is contained in the Network Health User Guide .
The sections that follow address only the minimal procedural steps needed once
you have access to the applications.
See the Network Health User and Reports Guides for additional startup
information and a full discussion of the application's features and how to use them.
9-2
1. Discover network elements, units, and interfaces in the network.
2. Configure the Network Health applications, then save them.
3. Organize elements into groups for reporting purposes.
4. Set up and run reports.
August 2001 9123-A2-GB20-20