Paradyne Comsphere 3920Plus Installation And Operation Manual page 95

To access Pattern from the Test branch, make the following selections:
Press the
If the mux is enabled, select the appropriate port by pressing the corresponding F key. Press the
key to scroll other ports into view.
3920-A2-GN31-10
Figure 3-8. Pattern Test and Digital Loopback Test
Figure 3-9. End-to-End Pattern Test
Test:
Pattern
F1 F2 F3
key until Pattern appears. Select Pattern to start this test.
Pick Test Port
Port1 Port2
F3
F1 F2
April 1995
<
>
DCP Operation
3-61