Configure Branch; Poll List Branch - Paradyne Comsphere 3920Plus Installation And Operation Manual

COMSPHERE 392xPlus Modems
Select Nxt to scroll through the entries in the Service Log.
To exit this function and remain in the Status branch, press the
Top-Level menu, press the

Configure Branch

The Configure branch of the LCD allows you to change and save the modem's configuration
options. For configuration options and DCP configuration procedures, refer to Chapter 4,
DCP Configuration.

Poll List Branch

The Poll List function is not available in:
The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in
order to support health and status polling and download broadcasting. The maximum number of
devices is 32 on the secondary channel and 64 on the diagnostic channel.
Status Configure
Display
To access PList from the Top-Level menu, make the following selections:
* Point-to-point control modems only poll address 01, and point-to-point tributary modems are always set to address 01.
3-30
key.
Multipoint tributary modems.
Modems with the Diag Connection configuration option disabled.
Modems using modulations that do not support the secondary channel.
Point-to-point control modems.*
"Status"
Test
Control
PList
(Tributary
only)
Clear Change Add
Active
Delete
Skip
April 1995
SubHS Call_Setup Tlk/Data
Acquire
key. To exit and return to the
(Mux Disabled
only)
Security Remote
3920-A2-GN31-10