Identity - Paradyne Comsphere 3920Plus Installation And Operation Manual

The message Command Complete appears on the LCD's bottom line indicating the VF Counters
are cleared.
To exit VF and remain in the Status Branch, press the
menu, press the

Identity

Identity displays the modem's serial number, model number, firmware revision level, hardware
revision number and firmware part number. Retrieval of this information is useful if you are
purchasing additional or replacement modems and/or making firmware upgrades.
To access Identity from the Status branch, make the following selection:
Press the
The modem's serial number appears on the LCD's bottom line. Press the
view the model number, firmware revision level, hardware part number, and firmware part number.
Ser #
Mod #
FRev
HPt #
FPt #
Country
To exit the Identity function and remain in the Status branch, press the
to the Top-Level menu, press the
3920-A2-GN31-10
VF Counter Clear
Command Complete
F1 F2 F3
key.
Status:
VF Identity
F1 F2 F3
key until Identity appears. Select Identity.
Status:Identity >
Ser#=00000000
F1 F2 F3
Serial number is an 8-digit number that identifies the modem.
Model number is an alphanumeric number that identifies the modem as
either a Model 3920Plus or Model 3921Plus modem.
Firmware revision level is an alphanumeric number that identifies the level
of firmware loaded in the modem.
Hardware part number is an 11-digit number that identifies the circuit card in
the modem.
Firmware part number is an 11-digit number that identifies to AT&T
Paradyne personnel the firmware release number.
Country code is a 7-text character that identifies the current country code.
key.
April 1995
DCP Operation
key. To exit and return to the Top-Level
key to scroll and
key. To exit and return
3-23