Disconnect - Paradyne Comsphere 3920Plus Installation And Operation Manual

COMSPHERE 392xPlus Modems
The Call Setup status Off Hook appears during the connection process.
If the connection is successful, the modem is online and one of the Normal Operation status
messages (Table 3-3) appears on the LCD. If the connection is not successful, the LCD displays
one of the Call Failure status messages (Table 3-3).

Disconnect

For dial backup applications, use this function when you want to disconnect an established call on
a dial line. For leased backup applications, use this function to switch between the primary leased
line and the backup leased line.
To access Disconnect from the Call Setup branch, make the following selection:
Select Disconnect.
For dial backup applications, the modem goes on-hook (hangs up) and the call is disconnected.
The Command Complete status message appears.
To exit this function and remain in the Call Setup branch, press the
the Top-Level menu, press the
3-66
DialDirectory:01
Off Hook
F1 F2 F3
Call Setup: >
Dial Disconnect
F1 F2 F3
Disconnect
Command Complete
F3
F1 F2
key.
April 1995
key. To exit and return to
3920-A2-GN31-10