Paradyne Comsphere 3920Plus Installation And Operation Manual page 50

COMSPHERE 392xPlus Modems
ee
ffff
xxxx
yyyyy
zz
To exit the Quick Configuration function and return to the Top-Level menu, press the
or
3-16
Displays the modem DTE port that is currently being displayed by the EIA
status indicators on the DCP.
P1 indicates Port 1 when MUX Mode configuration option is
disabled.
M1 indicates Port 1 when TDM/MSD is enabled.
M2 indicates Port 2 when TDM/MSD is enabled.
M3 indicates Port 3 when TDM/MSD is enabled.
M4 indicates Port 4 when TDM/MSD is enabled.
B1 indicates Port 1 when DTE Bridge is enabled.
B2 indicates Port 2 when DTE Bridge is enabled.
CC indicates Control Channel.
DC indicates Diagnostic Channel.
Displays the modem's modulation scheme as shown below:
V34 indicates V.34 family modulation.
V32t indicates V.32 terbo modulation.
V32b indicates V.32bis modulation.
V32 indicates V.32 modulation.
TMp indicates Trellis Multipoint modulation.
V22b indicates V.22bis modulation.
V27b indicates V.27bis modulation.
V33 indicates V.33 modulation.
V29 indicates V.29 modulation.
V22 indicates V.22 modulation.
V23 indicates V.23 modulation.
V21 indicates V.21 modulation.
212A indicates Bell 212A modulation.
103J indicates Bell 103J modulation.
Modem Transmit Rate indicates the rate at which the modem is transmitting data.
Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
Symbol Rate indicates the baud rate used by V.34 modulation. Refer to CCITT
specifications. Possible values are 3429, 3200L, 3200H, 3000L, 3000H, 2800L,
2800H, 2743L, 2743H, 2400L, 2400H.
Transmit Level indicates the power level at which the modem is transmitting
when running V.34 modulation. Possible values are 01– 64 dBm.
key.
April 1995
, ,
3920-A2-GN31-10