Paradyne 3800Plus Release Note
Network management system
Hide thumbs
Also See for 3800Plus:
- User manual (217 pages) ,
- Quick reference (29 pages) ,
- Installation instructions manual (12 pages)
Advertisement
Quick Links
COMSPHERE 6800 Series Network Management System
3800 Plus, 3821 Plus , 3821 Plus /3825 Plus Release 4.0, 3610/3611 ISDN DBM, 3610/3611
V.34 DBM, 3600 R3.5 DSUs, and 392x R3.1 Modems Release Notes
Document Number 6800-A2-GK66-20
October 1996
Overview
This document describes information for the 3821Plus modems, 3821Plus/3825Plus Release 4.0 modems, and the
two 3610/3611 DBMs (ISDN and V.34), plus information on the Synchronous Data Compression feature in
support of the 3800Plus R3.0 release. These release notes also have been updated to include support for the
3600 R3.5 and 392x R3.1 device releases.
Although this document contains information on the V.34 DBM, this card
may not be available at the time of the release of this document. Please
contact your sales representative for more information.
6800-A2-GK66-20
TM
NOTE
October 1996
1
Advertisement
Related Manuals for Paradyne 3800Plus
Summary of Contents for Paradyne 3800Plus
- Page 1 3610/3611 DBMs (ISDN and V.34), plus information on the Synchronous Data Compression feature in support of the 3800Plus R3.0 release. These release notes also have been updated to include support for the 3600 R3.5 and 392x R3.1 device releases.
- Page 2 Release Notes Summary In the COMSPHERE 6800 Series Network Management System Communications Products Support Command Reference Manual (6800-A2-GB31-10), the following commands are new or enhanced: Call Detail Display (cded) Call Duration Distribution (cdud) Call Occurrence Distribution (cod) Call Test (ct)* Change Address (cha) Change Options (cho) Change SPID (chspid)*...
- Page 3 COMSPHERE 6800 Network Management System Communications Products Support Command Reference Manual (6800-A2-GB31-10) The changes, modifications, or additions to the commands in this manual are described on the following pages. Call Test (ct) Change Address (cha) Change Options (cho) Change SPID (chspid) Change Telephone Number (chtn) Configuration Change Notification (ccn) Display Options (dso)
- Page 4 Call Test (ct) The Call Test (ct) command performs dial test for the 3600 Series R3.5 DSUs. This command can be scheduled and the destination for results can be specified. The input screen contains the following fields. Device This field specifies the device to be tested. Test Type This field indicates the kind of dial test to be performed.
- Page 5 Change Address (cha) This command is supported for 3821Plus modems. 6800-A2-GK66-20 October 1996...
- Page 6 Change Options/Display Options (cho/dso) Commands The following changes and additions apply to both the Change Options (cho) and Display Options (dso) commands in support of 3821Plus modems. The SECURITY Configuration Set screen contains one new field: Callback security. The values are disable and enable.
- Page 7 The Fallback Speeds Configuration Set screen for multiplexers contains selections for Port 1 through Port 6. The new selection set for FB1 rate (Kbps) is disable, 1.2, 2.4, 4.8, 7.2, 9.6, 12, 14.4, 16.8, 19.2, 2, 4, 8.4, 18, 32, 38.4, 48, 56, 28.8, 4.4, 9.2, 18.8, 21.6, 24.0, 26.4. The new selection set for FB2 rate (Kbps) is disable, 1.2, 2.4, 4.8, 7.2, 9.6, 12, 14.4, 16.8, 19.2, 2, 4, 8.4, 18, 4.4, 9.2, 18.8, 21.6, 24.0.
- Page 8 The following changes and additions apply to both the Change Options (cho) and Display Options (dso) commands in support of 3800Plus R3.0 modems. The DTE INTERFACE Configuration Set screen contains the new field Sync DTE rate. The values for this field are 128000, 115200, 112000, 96000, 76800, 72000, 64000, 57600, 56000, 48000, 38400, 28800, 19200, 14400, 9600, 4800, 2400, and 1200.
- Page 9 Change SPID (chspid) The new Change SPID (chspid) command supports 3610/3611 DSUs. The following field appears on page 1 of the Change SPID input form. Device This field specifies the device whose SPID numbers are to be changed. Standard addressing format applies. The following fields appear on page 2 of the Change SPID input form.
- Page 10 Change/Display Telephone Number (chtn/dstn) Commands This command was changed to support two local phone numbers for ISDN DBMs (ISDN DBM and DBM-I). The new fields are as follows: Local number 1 For the first local telephone number, this field accepts 36 characters with the same character set as the non-ISDN DBM single local number.
- Page 11 Configuration Change Notification (ccn) A ccn event message was added for the Change SPID (chspid) command when the ccn command is used to display the configuration events. In the description of the Configuration Change Notification results screen in the manual, add change SPID to the CATEGORY list and add display SPID to the UPDATE COMMAND list. 6800-A2-GK66-20 October 1996...
- Page 12 Device Health and Status (dhs) The Expanded Status field for 3600 Series R3.5 DSUs can now display the following facility alarms. facility alarm – rate conflict alarm facility alarm – cross pair detection alarm facility alarm – secondary channel conflict facility alarm –...
- Page 13 Display SPID (dsspid) The new Display SPID (dsspid) command supports 3610/3611 DSUs. The input form contains the following field: Device This field specifies the device(s) for which the SPID numbers are to display. The Display SPID results form lists device information for each specified device. 6800-A2-GK66-20 October 1996...
- Page 14 Download Device Firmware (dndf) This command supports 3821Plus modems. The valid selections for the Type of download field are ddd remote and ddd local. If the user is experiencing failure in the Broadcast Download process, turn off channel polling and increase the timeout interval (2 seconds is recommended) by performing the following steps: 1.
- Page 15 A new field is valid, Special Functions with the option XLOOP, to support the 3610 and 3611 Release 3.3c DSUs. The feature SDC (Synchronous Data Compression) displays in the Installed Features field when the 3800Plus Release 3.0 is installed. The following Country Codes are supported in the Modem strapping field for 3821Plus/3825Plus modems.
- Page 16 Reset Device (rs) The Reset Device (rs) command allows users to reset the 3600 Series R3.5 DSUs. This command can be scheduled and the destination for results can be specified. The input screen contains the following field. Device(s) This field specifies the device(s) to be reset. The results are sent before the reset occurs.
- Page 17 COMSPHERE 6800 Network Management System Communications Products Support Configuration Guide (6800-A2-GB20-10) The changes or modifications to the commands in this guide are described as follows. Table 2-1 is updated to include two new commands. Command Command Abbreviation Call Test Reset Device 6800-A2-GK66-20 APL/DDD/DDS Disruptive...
- Page 18 COMSPHERE 6800 Network Management System User’s/System Administrator’s Guide (6800-A2-GE26-10) The changes or modifications to the commands in this guide are described as follows. Table 5-2 is updated with two alerts added to the Alert Group apl-terminal. The Alert Type ela has a textual display of “External alarm A”...
- Page 19 COMSPHERE 6800 Network Management System Command Quick Reference Guide (6800-A2-GB15-10) The modifications in this guide are described as follows. The DDD Service Restoration Menu was updated to include the following additional menu items: 5) chspid – Change SPID 6) dsspid – Display SPID The DDD Device Control menu was updated to include the following additional menu item: 5) rs –...
- Page 20 COMSPHERE 6800 Network Management System Core Command Reference Manual (6800-A2-GB30-10) The changes or modifications to the commands in this manual are described as follows. Create Device Profile (crdp)/Delete Device Profile(dldp)/ Display Device Profile (dsdp)/Edit Device Profile (eddp) The Access module id field of the Create Device Profile (crdp), Delete Device Profile (dldp), Display Device Profile (dsdp), and the Edit Device Profile (eddp) commands now accepts the following values for Sequoia applications: Sequoia...
- Page 21 6-p Flex TDM – CCA/CBrdg-S 6-p Flex MCMP – CCA/Sequoia 6-p Flex MCMP – CCA/CBrdg-S Time Division Multiplexer Circuit Card, Central Site Digital Bridge, and Sequoia application present. Multichannel Multipoint Circuit Card and Sequoia application present. Multichannel Multipoint Circuit Card, Central Site Digital Bridge, and Sequoia application present.