Download Software; Selecting Clone Remote - Paradyne Comsphere 3920Plus Installation And Operation Manual

Comsphere 392 plus series
Hide thumbs Also See for Comsphere 3920Plus:
Table of Contents

Advertisement

COMSPHERE 392xPlus Modems

Download Software

The Download Software function sets parameters within the modem when transferring firmware
to one or more modems or when receiving firmware upgrades from a locally attached PC-based
controller. The latter is only performed by AT&T Paradyne's Customer Assistance Center
representatives.
There are two selections under Download Software: Clone Remote and To Local via DTE. Clone
Remote is used to transfer an exact copy of the firmware currently stored in a 392xPlus modem to
either one or more remote 392xPlus modems or one or more DC-attached 392xPlus modems.
When implementing a Clone Remote operation, the following is true:
For more information on Clone Remote operation, refer to Implementing a Clone Remote
Operation later in this section.
The second selection appearing on the LCD is To Local via DTE. This function permits firmware
upgrades to be transferred to a 392xPlus modem. This type of download requires a locally attached
PC controller to be connected to the modem's DTE port as well as special download software. Any
downloads using this selection are intended to be performed by AT&T Paradyne's Customer
Assistance Center representatives only.

Selecting Clone Remote

To access DwnLoadSoftware from the Control branch, make the following selections:
Press the
Download_Code. The DwnLoadSoftware screen appears.
3-42
The Clone Remote function only operates properly if the remote modems are connected to
the local modem via a leased-line or an established dial-line network.
The Clone Remote will not appear on the LCD if the modem is not configured for leased
lines and a dial-line connection does not exist.
Clone Remote operations are not supported unless both local and
remote modems are 392x Plus modems. (The 3800 or 391x Series
modems cannot be used in cloning operations with 392x Plus
modems.)
Control:
Download_Code
F1
F2
key until Download_Code appears. Press any function key to select
April 1995
NOTE
F3
3920-A2-GN31-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comsphere 3921plus

Table of Contents