Quick Configuration Display - Paradyne Comsphere 3920Plus Installation And Operation Manual

Quick Configuration Display

The Quick Configuration display indicates the basic operational characteristics of the modem.
The modem's Quick Configuration information appears on the LCD's bottom line.
To access the Quick Configuration display from the Top-Level display, press the
on the configuration of the modem, one of two screens appear.
If the modem is not operating with V.34 modulation, the following screen appears.
If the modem is operating with V.34 modulation, the following screen appears.
The V.34 modulation Quick Configuration information appears on the LCD's top line.
For more information on V.34, refer to the V.34 section in this chapter.
The following provides information about the Quick Configuration LCD display.
a
bbb
c
dd
3920-A2-GN31-10
Leased:28.8
Status Configure
F3
F1 F2
Leased:19.2 >
abbb cdd ee f f f f
F1 F2 F3
xxxx yyyyy zz >
abbb cdd ee f f f f
F1 F2 F3
Displays the network position of the modem. The letter C indicates this is a
control modem, and T indicates this is a tributary modem.
Displays the network management address of the modem. The valid address
field range is from 001 to 256.
Displays the DTE mode. The letter A indicates the currently selected port is in
Asynchronous mode, and S indicates the currently selected port is in
Synchronous mode. If the NMS channel is selected, the letter in this location
(A or S) will indicate the status of Port 1. (The NMS channel is always in
Asynchronous mode.)
Displays the line mode. The letters LA indicate Leased Answer mode, LO
indicate Leased Originate mode, and D indicates Dial mode.
April 1995
DCP Operation
key. Based
3-15