Options; Record - Paradyne Comsphere 3920Plus Installation And Operation Manual

COMSPHERE 392xPlus Modems

Options

The Options Status function displays all optional firmware features currently installed in the
modem. If no firmware options are installed, None_Installed appears on the LCD.
To access Options from the Status branch, make the following sections:
Press the
If optional features are installed in the modem, they appear on the LCD's bottom line. If other
features are installed, press the
To exit this function and remain in the Status branch, press the
Top-Level menu, press the

Record

Record is a troubleshooting tool used in conjunction with AT&T Paradyne support personnel. This
function retrieves and reports any sequence faults to support personnel. A sequence fault is an
irregular or unexpected event.
There are two selections under Record: Display and Clear. Display allows up to eight sequence
fault messages that are recorded by the modem and displayed on the LCD in descending order. If
no sequence faults have occurred, then Modem O.K. appears.
Clear is used to remove all sequence fault messages from nonvolatile memory and the LCD.
To access Record from the Status branch, make the following selections:
Press the
3-28
Status:
DTE Options
F3
F1 F2
key until Options appears. Select Options.
Options:Status >
V.29 V.33
F1 F2 F3
key to scroll other features into view.
key.
Status:
Options Record
F1 F2 F3
key until Record appears. Select Record.
April 1995
key. To exit and return to the
3920-A2-GN31-10