7. Various Scan Settings
top edge touches rear of ARDF
Original Setting
This section explains the settings for scanning one-sided or two-sided originals.
This function is not available unless ARDF is installed.
1.
Press [Options].
7
2.
Press the [ ] or [ ] key to select [Original Setting], and then press the [OK] key.
3.
Select [1 Sided Original] to scan one-sided originals, and then press the [OK] key. Select [2
Sided Orig.(T to T )
press the [OK] key.
The following table explains the relationship between the page opening orientation and control panel
selection key.
140
Original orientation
BRB011S
] or [2 Sided Orig.(T to B )
Control panel key
] to scan two-sided originals, and then