Ricoh 920F Operating Instructions Manual page 375

1. Sending Scan Files by E-mail
4. Press the [OK] key.
1
• If under [System Settings], [LDAP Search] is set to [On], a screen to select a search object appears
when you press the [Search Destination] key. On the screen, select [Search Address Book], and then
press the [OK] key.
• To cancel a selected destination, press the [ ] or [ ] key to select the target destination, and then
press the [ ] key.
• Depending on the security settings, some destinations may not appear in the destination list.
Selecting destinations by entering the registration numbers
Select the destination from the machine's address book using its registration number.
1. Press the [Search Destination] key.
The illustration is an example. The actual appearance may be different.
2. Press the [ ] or [ ] key to select [Search by Registration No.], and then press the [OK] key.
3. Use the number keys to enter the three-digit number assigned to the destination, and then
press the [OK] key.
Example: To enter 003
26
BRB003S